Designed to fit and follow the shape of your foot and made on an exclusive SAS Walking Shoe Last. SAS Tripad™ Comfort Cushions give all-day comfort. Initial fit should be wide enough to stay very comfortable across the ball of the foot yet roomy enough in the front so the toes are not cramped. The heel should be snug and should not slip while walking.
SAS Coolstep™ Footbed: Removable foot bed is designed to keep the foot dry and comfortable all day long. The anti-friction top cover inhibits heat providing a cooler surface underfoot. The bottom layer wicks away moisture while cushioning each step. Coolstep™ footbeds are antibacterial and washable for a healthy foot environment.
EZ Lace™ System: Loosen the top lace until there are about two inches of lace left on each end, allowing the foot to slip in easily. Once the foot is in place, the EZ Lace™ slides through the rings so easily you have to be careful not to lace too tight. Use the second eyelet for a tighter fit.
SAS Tongue-Holder: The comfortable cushioned tongue has an elastic gore stitched to the lining of the shoe in order to hold the padded tongue in place.
SAS Odor-Resistant Tripad™ Cushions: Our odor-resistant Tripad® material cushions the three pressure points of your foot: the inside ball, the outside ball, and the heel. This material maintains its shock-absorbing capacity.
Quality, comfort, and fit are very important to SAS. Because of this, we always recommend being fitted for SAS shoes at one of our retail stores whenever possible. Our in-store fittings include the use of The Brannock Device to get an indication of proper size. A shoe is not ‘fitted’ until it is placed on the foot, but the fitting process can begin with this device. Size is first measured heel to toe, then the arch measurement is taken from ball to heel and width measurement is indicated on the outer side of the foot. Both feet are measured and a variety of sizes and widths may be recommended to try before making a final selection.
Men's Fit Guide
|Men's Widths Size Chart
|B = (S) Slim
|C = (N) Narrow
|D = (M) Medium
|E = (W) Wide
|EE - EEE = (WW) Double Wide
|EEE - EEEE = (WWW) Triple Wide
Tips for Measuring and Fitting
- Remember, when we go up in size, the width may also increase.
- All styles fit differently.
- Many customers may require doctor recommended orthotics. Inserts may require added depth in the shoe and make it fit differently, so try to account for this adjustment.
- Struggling to find your perfect fit? Please contact us or call 1-877-727-7463.
Full Grain Leather
Apply SAS Shoe Cleaner.
Wipe with a damp cloth or rag. Repeat Steps 1 and 2 as necessary. Allow the shoe plenty of time to dry.
Apply SAS Wax Polish or SAS Soft Leather Cream Polish in the appropriate color to the newly cleaned areas. Allow for the shoe to dry once again.
Buff polished areas with a clean soft rag or the SAS Shoe Brush in order to create luster finish on the shoe.
Carefully apply SAS Sole Cleaner to a clean damp rag and buff gently. Repeat as necessary to completely remove all traces of dirt, smudges, or scuffs.
Use brush provided to remove any loose dirt.
Spray SAS Footbed Cleaner on footbeds, making sure to wet footbed completely. Let cleanser set for a few seconds to loosen dirt and stains.
Scrub with the brush in small, circular motions and bring to a light lather.
Wipe down with a clean damp rag to remove dirt, and let air dry.
Rebrush footbed with brush.
Repeat if necessary.
Still have a question about taking care of your shoes? Contact our CASA Department via email or call 1-877-727-7463, we're happy to help you out!